• Pixhawk PX4 2.4.8 with Safety Switch and Buzzer 16GB SD
  • Pixhawk PX4 2.4.8 with Safety Switch and Buzzer 16GB SD
  • Pixhawk PX4 2.4.8 with Safety Switch and Buzzer 16GB SD
  • Pixhawk PX4 2.4.8 with Safety Switch and Buzzer 16GB SD
  • Pixhawk PX4 2.4.8 with Safety Switch and Buzzer 16GB SD
  • Pixhawk PX4 2.4.8 with Safety Switch and Buzzer 16GB SD
https://img.quadkopters.com/wp-content/uploads/2017/09/pixhawk-2_4_8-1-150x150.jpg

Pixhawk PX4 2.4.8 with Safety Switch and Buzzer 16GB SD

र 4750.00 र 6500.00 Save 27%
Weight: 75 grams
SKU: PIX2.4.8
Stock:  
Note: This is PIX 2.4.8 which has some low quality sensors, but same as that of PIX2.4.7. This is to reduce the cost of the pixhawk
Features:
1. The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time operating system;
2. 14 PWM / servo output;
3. Bus interface (UART, I2C, SPI, CAN);
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe;
5. Provide automatic and manual modes;
6. Provide redundant power input and failover;
7. Multicolor LED lights
8. Provide multi-tone buzzer Interface
9. Micro SD recording flight data
Specifications:
Microprocessor
1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit
2. frequency: 168MHZ, 256K RAM
3.32 STM32F103 backup coprocessor
Sensor
1.L3GD20 3-axis digital gyroscope 16
2.LSM303D 3-axis accelerometer 14 / Magnetometer
3.MPU6000 6-axis accelerometer / magnetometer
4.MS5611 precision barometer
Interface
1 .5 high voltage compatible UART 1, 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
7.I2C
8.SPI
9.3.3 and 6.6VADC input
10. External MICRO USB Interface
Packing Included:
1 * Pixhawk 2.4.8  32bit ARM Flight Controller
1 * Safety button
1 * Buzzer
1 * 16G TF card(IO firmware has written)
Cables

You must be logged in to post a review.