• RCX RS2206 (V3) 2400KV
  • RCX RS2206 (V3) 2400KV
  • RCX RS2206 (V3) 2400KV
  • RCX RS2206 (V3) 2400KV

RCX RS2206 (V3) 2400KV

र 1199.00 र 1250.00 Save 4%
Weight: 45 grams
SKU: RCX2206

This is the latest version of RS2206 V3 from the previous RS2206 V2 Motor. This motor uses Arc N52SH Magnet, Japan EZO Bearing, 0.15mm Nippon Steel Silicon Steel and 7075 High Quality CNC Material.


  • Model: RS2206 V3
  • KV: 2400KV
  • Weight: Approx. 32.8g (net weight included long AWG cables)
    • you can lower the weight if you shorten the long AWG cables.
  • AWG Cable: 15cm
  • Prop Shaft Diameter: 5mm (CW)
  • Stator Diameter: 22mm
  • Stator Length: 6mm
  • Shaft Diameter: 3mm
  • Configuration: 12N14P
  • Rotor: N52SH Arc Magnets
  • Shaft: Titanium Alloy Hollow Shaft
    • Top 5mm Hollow
    • Bottom 4mm Solid (even more hard)
  • Stator: 0.15mm Nippon Steel Silicon Steel
  • Bearings:  Japan EZO Bearing 4x9x4mm (684ZZ)
  • CNC Material: High Quality AL 7075
  • Motor Dimensions: Φ–mm
  • ldle Current: 0.00A @ 10V
  • Internal Resistance: 0.00Ω
  • Suitable ESC: 20-40A (depends on the propeller and battery you use)
    • HobbyWing’s XRotor works pretty well with RS2206 motor so it is recommended especially the XRotor 30-40A.
    • Since SimonK and BLHeli might shutter during high RPM on small props (eg. 5030). So if you plan to drive the motor hard, please consider to get XRotor 30 because XRotor was tested at high RPM without any sync issue.
  • Suitable Battery: 3-4S Li-Po (refer to thrust test table and videos)

Package Included

  • 1 x RCX RS2206 V3 2400KV FPV Racing Edition Motor
  • 1 x Hex Locknuts M5 (Slip-Resistant) – CW
  • 1 x Circle Plate
  • 1 x Set of M3*5 Screw

You must be logged in to post a review.