• BEITIAN BN-220 GPS Module
  • BEITIAN BN-220 GPS Module
  • BEITIAN BN-220 GPS Module
https://img.quadkopters.com/wp-content/uploads/2021/10/bn220-gps-3-150x150.jpg

BEITIAN BN-220 GPS Module

र 950.00 र 1250.00 Save 24%
Weight: 35 grams
SKU: BN220
Stock:  

Model:BN-220 GNSS module

Description

Dimension: 22mm*20mm*6mm
Weight: 5.3g
Connector: 1.00mm spacing between the 4pins patch seat
 
 
Specification
Electrical Characteristics
Chipset: M8030-KT
Receiving Format: GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS
Frequency: GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1
Channels: 72 Searching Channel
 
Sensitivity
Tracking : -167dBm
Reacquisition : -160dBm
Cold start : -148dBm
Hot start : -156dBm
 
Accuracy
Position Horizontal: 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky)
Velocity: 0.1m/sec 95% (SA off)
Timing: 1us synchronized to GPS time
 
Acquisition Time
Cold Start: 26s
Warm start: 25s
Hot start: 1s
 
Data and Update Rate
Support Rate : 4800bps to 921600bps,Default 9600bps
Data Level : TTL or RS-232,Default TTL level
Data Protocol : NMEA-0183, Default NMEA-0183
Single GNSS : 1Hz-18Hz
Concurrent GNSS : 1Hz-10Hz,Default 1Hz
 
Operational Limits
Altitude : 50,000m Max
Velocity : 515m/s Max
Acceleration : Less than 4g
 
Power consumption
VCC : DC Voltage 3.0V-5.5V,Typical: 5.0V
Current : Capture 50mA/5.0V
Operating temp : -40 °C ~ +85°C
Storage Temp : -40°C ~ +105°C
 
Indicator :
TX LED:blue.The data output, TX LED flashing
PPS LED:red.PPS LED not bright when GPS not fixed,flashing when fixed
 
Wiring:
GND, TX output, RX input, VCC (3.0v-5.5v)
 
Pin Description:

PIN

PIN Name

I/O

Description

1

GND

G

Ground

2

TX

O

Serial Data Output.

3

RX

I

Serial Data Input.

4

VCC

I

DC 3.6V – 5.5V supply input,Typical: 5.0V

You must be logged in to post a review.